Impregnation Equipment

Professional supply of impregnation equipment

+86-18819097531 +86-13556668071
4dhcpmingchen
JD-ZB2200 Central vacuum
  • Detail

Equipment Description:
1、This equipment is a multi unit vacuum system equipment developed by our company, which provides vacuum extraction for the operation of on-site workshop immersion machines Empty function, which allows for the free setting of operating parameters within the vacuum range, enabling the vacuum system to operate and match on-site to the fullest extent possible In good condition, meeting the workshop's requirements for the use of vacuum;
2、The equipment adopts PLC control, with stable and reliable performance, simple and convenient operation and maintenance;
3、The vacuum unit adopts a stepped energy-saving mode, which increases power and operates effectively。
4、The equipment is equipped with an automatic cleaning function, which comes with a startup and shutdown operation for cleaning. The exhaust port of the pump will not emit black smoke Unenvironmentally friendly hazards.
rendering:
technological process:
After setting a set of normal vacuum ranges, when the vacuum value is greater than or equal to high vacuum, the screw pump adopts low frequency When operating below low vacuum, the screw pump operates at high frequency, while the Roots pump adjusts the operating frequency through a pressure controller
Reference parameters
project Technical Parameter Parameter Description
Equipment size L7230*W1580*H2950
 
Dry screw pump+Roots pump combination
JD-ZK2200 (using the principle of two switch frequency conversion)
1.Vacuum pump unit pumping speed: approximately 2200M ³/ H/unit
2.Power: 16.5KW/unit
3.Power supply: 380V 50Hz
CHILLERCHILLER
JD-LC85*3 chillers with a head of 32M and rated flow rate:30L/min
1.Customized cooling capacity:8500W
2.total power:3.2KW/ set
3.Power supply: 220V 50Hz
buffer tank
Φ800*1500*3个
Single volume:0.9M³
Material: 304#
Weight: Approximately 125KG per unit
waste liquid tank 3 waste liquid tanks
Single volume: 2.5 liters
vacuum gauge measuring range:1*10^-2 ~ 1*105Pa
Vacuum interface 6寸 DN150